Norcros Adhesives | Distributors, Fixers, Flooring Installer, Homeowners | How To Level A Floor Using Pro 30 Fast Track Eco Levelling Compound

How To Level A Floor Using Pro 30 Fast Track Eco Levelling Compound

First, make sure the area is clean and dry. Brush away any dust, dirt, or laitance
Now you’re ready to prime. Thoroughly mix Norcros Prime Bond with water at a ratio of 1-to-4
Apply with a brush over the floor and leave to dry
Now you’re ready to start applying the leveller. Add 5 litres of water to a clean bucket and slowly add the 20kg bag
Using a drill mixer, mix enough leveller for about 20 minutes working time
Mix it to a smooth consistency
Pour the compound onto the floor
Trowel out to the desired depth, ensuring all areas are evenly covered
Test if the levelling compound is dry by using your hand. It’s normal for heat to radiate from the newly-laid floor
Once it’s dry, floor coverings can be laid using the manufacturers recommended methods

Other How To's

How To

Tiling to cement: sand render walls

PREPARATION The render must be a minimum of 2 weeks old to enable movement caused by drying shrinkage to have taken place. It must be clean, dry and free from dust, laitance or any other contaminants which may act as a release agent, preventing the adhesive from bonding to the render. If the render is […]

How To

Tiling to plasterboard walls

PREPARATION Plasterboard should be dry, securely fixed and rigid with no protruding fixings with the face to receive decorative finishes exposed. It should be a minimum 12.5mm thick when fixed to timber framing or battening and fixed in accordance with the manufacturers recommendations. The maximum weight of tiling which plasterboard is able to support is […]